Brakes/Levers/Pads

- High Performance Brake Pads - Disc Pad Material: Organic

- For MTB with lateral pull brakes - Double digit activated lever - Aluminium lever blade and collar - Compatible with grip shifting systems

- BMX aluminum levers for caliper or U-brakes - 2-piece hinged clamp

- Optimum heat dissipation - High durabilty - Wear indicators - 1.95mm thick - Rounded edge - UCI approved

Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: Shimano: - XTR BR-M9000,BR-M9020,BR-M987,BR-M988,BR-M985 - XT BR-M8000,BR-M785 - SLX BR-M675,BR-M666 - DEORE BR-M615 - ALFINE BR-S700 - BR-RS785 - BR-R785 FSA: - K-Force DB-TX-9000 - Afterburner DB-TX-9150

Characteristics: - long lasting, high endurance pad compound - very easy modulation of braking force - high temperature stability for consistent brake power - organic formula is low noise and rotor friendly Fits: Shimano: - XTR BR-M9000,BR-M9020,BR-M987,BR-M988,BR-M985 - XT BR-M8000,BR-M785 - SLX BR-M7000,BR-M675,BR-M666 - DEORE BR-M6000,BR-M615 - ALFINE BR-S700 - BR-RS785 - BR-R785 - BR-CX75 - BR-R515 - BR-R315 FSA: - K-Force DB-TX-9000 - Afterburner DB-TX-9150 REVER - MCX1 Post Mount

Shimano 105 BR-R7070 Ice Tech Disc Brake Caliper Flat Mount Utilizing Shimano’s lightweight and sleek flat mount design, the BR-R7070 hydraulic disc brake caliper features premium stopping power and aerodynamics for road applications. The new SM-RT70 rotor offers Ice Technologies construction for excellent heat management for confident performance on the longest descents. - Increased rider control in all conditions - Sleek Flat Mount design integrates seamlessly into a road bike’s aero profile - Ceramic pistons - Recommended brake lever: ST-R7020, ST-R7025 - Recommended rotor: SM-RT70 - Caliper fixing bolt (4 mm) made of steel - Application: Cyclocross, Gravel, Road - Brake Type: hydraulic, 2 pistons - Hydraulic Fluid: mineral oil - Hose: SM-BH90 (not included)

The Shimano BL-MT200 Hydraulic Disc Brake Lever and BR-MT200 Disc Brake Caliper - Brakes are pre-bled - Hydraulic hose included - Rotor not included

Shimano Alivio hydraulic disc brake sets offer reliable and powerful braking, along with pre-bled hoses for convenient installation. - BL-MT200 hydraulic disc brake lever - BR-MT200 hydraulic disc brake caliper - Rotor sold separately

This Shimano Alivio BL-T4000 V-Brake Lever Set is compatible with all long-pull brakes, including linear-pull brakes and mountain-style mechanical disc brakes. - Compatible with V-brakes and MTB mechanical disc brakes - Adjustable reach - Brake Lever Use: Pair - Cable Head: Mountain - Brake Lever Actuation: Long Pull

• 107mm arch for better clearance with mud guard • Updated rubber boots secure attachment to lead pipe • Strong braking power with excellent braking control • Cartridge shoe holder • Color options: Black, Silver

Shimano Altus hydraulic disc brake and lever sets feature an entry-level design that's ideal for beginner riders and riders with smaller hands. - The brake lever's versatile design matches numerous bike styles - Braking power is adjusted for entry-level riders - Pre-bled brakes for easy, quick, and clean installation

Shimano BR-M375 Mechanical Disc Brake Caliper - Pad adjust tool size unified to 5mm allen key - Quick/fast assembly - Light braking operation for easy/long riding - Clean cable routing in combination with both chain stay and seat stay mount - Brake power same as BR-M416A - 20% pad clearance increase - Cable actuated - Single 74mm caliper - For use with Linear-pull MTB levers - B01S Resin Pads - Rotor not included - Frame or fork mount adapter and rotor not included - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull

- 107mm arch gives a better mud guard clearance - Updated rubber boots - Strong braking power with excellent braking control

BL-M4100 - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever BR-MT410 - Long-lasting performance and quick - Easy installation and adjustment - Superior modulation gives you the power you need - Quick piston retraction - Lightweight 2-piston disc brake caliper - Pre-assembled and bled brake lever and caliper, with SM-BH59-SS hose & mineral oil - Without rotor and adapter - One-way bleeding system

Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring

Shimano G04Ti Metal Disc Brake Pads deliver superlight, long-lasting braking power. - Fits XTR BR-M9000, BR-M9020, BR-M985, XT BR-M8000, BR-M785, SLX BR-M666, Alfine BR-S700 and BR-R785, BR-RS785 road disc calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Titanium backing plate for light weight and improved heat insulation

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

- Pair of L-Type brake pads with fins, for one caliper Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

- Pair of L-Type brake pads with fins, for one caliper - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

- Shimano, BR-9000/9010, R55C4, Replacement cartridge pads, pair - Also fits BR-6800 and BR-5800 - More stopping power in all conditions

- Quieter than ever, but with superb, consistent braking performance on any long, steep descents thanks to excellent heat dissipation. - The new arm shape is more robust, leading to quieter operation. - Featuring ICE TECHNOLOGIES and FREEZA; ICE TECHNOLOGIES is a proprietary fabrication technique consisting of a 3-layer aluminum and stainless-steel structure allowing for superior cooling. FREEZA are aluminum/stainless fins that support rapid heat dissipation. Combined you get longer pad life, less brake fade and substantially quieter braking. - Recommended both for road or mountain bike braking systems. - Lock-ring included. - Disc Diameter: 140mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Stainless steel/Aluminum - Disc Technology: Ice-Tech and Freeza - Weight: 96g

Quieter than ever, but with superb, consistent braking performance on any long, steep descents thanks to excellent heat dissipation. - The new arm shape is more robust, leading to quieter operation. - Featuring ICE TECHNOLOGIES and FREEZA; ICE TECHNOLOGIES is a proprietary fabrication technique consisting of a 3-layer aluminum and stainless-steel structure allowing for superior cooling. FREEZA are aluminum/stainless fins that support rapid heat dissipation. Combined you get longer pad life, less brake fade and substantially quieter braking. - Recommended both for road or mountain bike braking systems. - Lock-ring included. - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Stainless steel/Aluminum - Disc Technology: Ice-Tech and Freeza - Weight: 114g

- High performance disc brake rotor featuring ICE TECHNOLOGIES FREEZA, a proprietary fabrication technique consisting of a 3-layer aluminum and stainless steel structure allowing for superior cooling and performance - Reduced power fading ensuring consistent high performance even on long downhill stretches - Helps increasing brake pads life and reducing noise - Recommended both for road or mountain bike braking systems - Internally serrated lock-ring type version (config 05, 06), lock-ring included - Externally serrated lock-ring type version (config 01, 02, 03, 04), lock-ring included

- SLX / 105 level Center-Lock rotors - Ice-Tech construction uses stainless steel brake surfaces with an aluminum core - The higher heat dissipation of the aluminum helps to reduce the surface temperature - High stopping power and practically no signs of fading - Features an external serration lockring (BB-type tool), compatible with all axle types

Shimano Saint hydraulic disc brakes feature an opposed ceramic 4-piston design which helps absorb rotor heat and reduce vibrations. The Servo Wave 2-finger levers feature tool-free stroke and position adjustment, while the one-way bleeding caliper and hinged lever clamp offer easy installation and maintenance. - Brakes are pre-bled for convenient installation - Includes metal ICE TECH pads with radiator fins - I-spec B-type shift lever compatible

The Shimano SORA BL-R400 brake levers are perfect for drop-bar single-speeds or geared bikes with downtube/bar-end shifter setups. They feature a sleek, aerodynamic design and a comfortable hood shape. - Super SLR system - Compatible with all Dual-Pivot caliper brakes

Shimano Road brake shoe sets - R55C4 pads - Aluminum pad holder - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Cartridge - Rim Compatibility: Standard

Shimano Ultegra R8010 direct mount seat stay rear break caliper. - Direct mount brake - Direct brake mounts connect directly to the frame to reduce redundant parts and increase overall braking performance - Sleek design - Narrower gap between arms - Wider clearance with larger tire sizes - Compatible with wider 28C tire size - Model Number: BR-R8010-RS - Series: Ultegra - Brake Type: Direct mount type - Average Weight: 172 grams

Deore XT M8100 hydraulic disc brakes are designed to provide high-performance braking for a variety of MTB riding styles. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8120 4-piston caliper is designed for tough enduro trails - Set includes brake lever, caliper, finned metal pads, and hose - Brakes are pre-bled for convenient setup

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system. - Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss - Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power - MatchMaker compatible for a clean and simplified look - Ambidextrous lever mount design - Lightweight 4-piston dual-diameter caliper - Includes steel-backed organic pads - Front includes 950mm hose - Rear includes 1800mm hose

Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker-compatible brake set provides all the power of its siblings, keeping you in complete control.

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

- The Storm HC rotor is designed for extreme use and unparalleled braking performance under high braking forces.

• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

- High performance compounds recommended for all-conditions - Steel backing

The Supra 2 is an updated design of the original Supra. This is one of Kool-Stop's most popular rim pads and offers a thicker friction material for longer life. Features: - Hardened and plated reinforced steel backbone - Patented angled tip plow - Water grooves - Knurl-lock washer system - Self tow in - Available only in Threaded - Rim Friendly Compounds Compounds: - Salmon - Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Electric - Kool-Stop's E-Electric compound is formulated specifically for the higher speeds and weights of electric bicycles. - Clear - An extreme compound for only experienced trick or trails riders needing a compound that will instantly lock the wheels. - Ceramic - This compound was designed for ceramic coated rims and is great in all weather conditions. - Pink - Colored pads are a semi–aggressive compound that will give you good performance in all weather conditions. Specifications: - Weight per pair: 60.6 grams - Overall length: 66.5 mm - Pad contact width: 9.1 mm

- Lightweight aluminum cooling fins integrated into the backing plate. - A graphene thermal transfer plate pulls heat away from the semi-metallic compound and rotor and into the cooling fins - Prevent brake fade and warped rotors.

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

Conduct Hydraulic Disc Brake rotor for use with Giant's Conduct Hydraulic Disc Brakes Upgrade Kit - the perfect way to improve the stopping power of your mechanical disc brake-equipped road bike - deLivering you the benefits of hydraulic discs; improved braking power and a sealed lower maintenance system, with minimal hassle and cost. - 6 bolt fitting - Fits Giant Conduct and Conduct SL disc brakes

- High friction compound for improved stopping. - Set includes mounting hardware. - Compatible w/ all existing V-brake designs.

- 410 Stainless steel construction - (6) Black M5 mounting bolts - Weights: 68g (140mm) / 85g (160mm) / 112g (180mm)

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

From XC racers to freeriders, Avid's Elixir 3 Hydraulic Disc Brake is a favorite amongst MTBers in the know because its value-to-technology ratio is through the roof. Avid's Taperbore technology and Power Reserve Geometry deliver great modulation and pinpoint stops. Increased power comes courtesy of a super-stiff, 2-piece caliper that contains larger pistons and DOT 5.1 fluid for better heat dissipation and resistance to brake fade. Plus, the Elixir's unique integrated reservoir provides a major weight reduction and a sleek look. It even comes complete with Avid's HS1 rotor.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.

- Dual pivot caliper brake - Melt forged aluminum arms - Quick release mechanism - Dimension : 39-52mm - Designed for 28C tire

- Top mount levers for use with caliper or cantilever brakes - Forged aluminum - Hinge clamp style - Return spring and reach adjustment - Black - 90g / pair

- Ergonomic lever blade - Advanced 9mm internal brake lever piston - 5mm hydraulic brake hose - High performance hydraulic brake fluid - Hybrid pistons - High performance resin pad compound - New high flow caliper - 2.3mm thick rotors - CNC machined and marked adapters - Compatible with 223/220/203/180/160/140mm rotors (sold separately) - Weight: 310g (Front without rotor and adapter)

Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included. SPECIFICATIONS - Dual-piston actuation - Even pad wear - Easy adjustment and set up - Works with ALL long-pull levers - TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization - Compound works well in dry conditions but may wear quickly in wet/muddy conditions - Rotor and adapters sold separately - Weight: 170g/caliper per wheel

The Spyre SLC is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 146g per caliper - Carbon actuation arm for maximum rigidity, and weight savings - Dual-piston actuation - Works with ALL cable actuated road levers. Compressionless (linear strand) housing is highly recommended - TRP ultra-grippy semi-metallic pads. These are compatible with Shimano M525/M515 pads - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only