Other

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Disc Brake Adapters

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

We never just want to make something, that´s already there. We want to make something different, something better. Featuring a classy and costly CNC-Finish and a wonderful Titanium bolt, Squeezy is not just light with 7.9g @ 34.9/35mm. Unlike other seat clamps, Sqeezy has a collar-less design. Collars are basically just a installation aid, to prevent the clamp from sliding down the seat tube, but in fact they locally stiffen up the clamp and hinder it from distributing the clamping force evenly. Squeezy acts like a thin metal band, that perfectly snuggles around the circumference of your seat tube and smoothly secures your seatpost in place. Compact design and the Titanum Torx T-25 bolt placed as close to the seat tube as possible allow even distribution of loads and dropper posts in particular can benefit greatly from smooth load distribution. 3 "Slip-Stopps" prevent Squeezy sliding down the seat tube during installation. Squeezy is available in various diameters to fit the most common seat-tubes. Please note, that this dimension refers to the seat-tube outer diameter and NOT to the seatpost specification. - 31.8mm - 34mm - 34.9/35mm - 35.6mm - 36.4mm - 37mm - 38mm - 38.9/39mm Features - extremely low weight: 7g (31.8mm), 9g (39mm) - material: Al-7075-T6, fine-feed CNC finish - collar-less design for more even clamping force distribution - Ti-6Al-4V titanium-clamping bolts mit Torx T-25 drive (please note, that Squeezies from first batch had T-20 bolts, but we figured, that was not a very smart choice) - "Slip-Stopp" installation aids

Clean up your Bontrager Elite stem cockpit with Blendr Elite bases. Blendr works with this simple formula: Stem + Base + Mount. Add accessory. Key features: - Bases for use with Elite stem - Add any XXX accessory mount for an elegant integrated look

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager Pro Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars. - Required for bar end use on Satellite Plus Isozone bars - For use with clamp style bar ends - Includes 2 adapters and 2 rubber handlebar inserts. - Bar end sold separately

Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Campagnolo EKAR disc brake adapters. - Includes bolts

Campagnolo EKAR disc brake adapters. - Includes bolts

EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.

Campagnolo Extra Parts

EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle. - Weathertight o-ring sealed connectors - Allows for the mounting of the EPS Power Unit beneath the bottom bracket - Only compatible with Chorus and Athena EPS systems

Campagnolo Pulley Assemblies

EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet

Campagnolo Pulley Assemblies

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

DEITY Grip Clamps offer a way to customize your bike to match your style.

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 38.6mm, Blue

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 38.6mm, Bronze

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 38.6mm, Red

In true DEITY fashion, the Crosshair Headset Cap exemplifies the style and detail you've come to expect from everything DEITY offers. We've included 3mm, 5mm, and 8mm spacers that are color-matched to create a clean refined option to finish off your cockpit. Not only are the cap and spacers machined from 6061 Aluminum, the bolt is CNC Machined from 7075 Aluminum to give you a precise and extremely durable centerpiece that is truly hassle-free. - Complete Aluminum 1 1/8" Headset Cap Kit - Features 7075 T6 Machined Aluminum Bolt - Includes 3mm, 5mm, and 8mm Spacers - Spacers Feature a Thin Profile For a Minimalist Style - Countersunk Bolt Design - Kit Includes the Star Nut - Weight: 13 grams (without star nut)

- Complete Aluminum 1 1/8" Headset Cap Kit - Features 7075 T6 Machined Aluminum Bolt - Includes 3mm, 5mm, and 8mm Spacers - Spacers Feature a Thin Profile For a Minimalist Style - Countersunk Bolt Design - Kit Includes the Star Nut - Weight: 13 grams (without star nut)

A super tough sprocket which uses cold-forging technology to help radically increase strength over a traditional CNC machined sprocket, whilst maintaining a more affordable price tag. This sprocket incorporates a double-sided design, allowing you to change up the look of your bike without having to spend a dime. - 6061-T6 alloy, full cold-forged - Two sided design, pick the side you like the most or flip it to give your bike a new look - Runs on 24mm spindle, supplied with adaptors for 19mm & 22mm