Wheels

The definition of "road cycling" now includes gravel and dirt as well as pavement. At the same time, bikes are evolving to meet the fit requirements of smaller riders. Meeting these two distinct needs was the driving force behind the Zipp 303 Firecrest 650B Tubeless Disc-brake wheelset. The smaller rim size provides room within frames and forks for larger tires that deliver increased comfort, compliance, and cornering performance. With more tire between the rim and the ground, the overall wheel diameter, including the tire, is similar to a standard 700c wheel and road tire combination. Back on the pavement, the 650B is a better-fitting wheel for smaller athletes riding compatible frames. For too long, many smaller cyclists have trained and raced on standard 700c wheels, losing out on the advantages of a proper fitting wheel such as improved handling and the elimination of front wheel-toe overlap. At the center of the 303 650B Firecrest Tubeless is a versatile and durable hubset, the German-engineered ZR1 DB. - Zipp graphics and cosmetic identity that scream speed - Versatile 45mm rim profile for increased speed and better cornering, control, and comfort - Tubeless design provides secure performance when ridden at lower tire pressures - ZR1 DB hubset is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Built with Sapim CX Sprint J-bend spokes - Center Lock rotor interface (lockring included) - Ships with 12mm end caps

Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender

Suitable for both mountain and road applications. - Includes 2 x Tubeless Valves, 2 x Narrow Round Bases, 2 x Wider Round Bases, and 2 x Square bases to fit different rim profiles, Spare Alloy Valve cap with integrated valve core remover - Installs securely with a 4mm fitting for a hex wrench of the valve and a 10mm wrench flat on the nut

The new SLR 1 50 Disc WheelSystem combines aerodynamic efficiency and minimized power loss in a lightweight package designed for versatile road performance. The SLR 1 50 features 50mm aero rim profiles for efficiency on the flats and a dynamic ride quality on hillier roads. Hookless rims with a broad inner width offer greater support for high-volume tires along with enhanced sidewall stiffness for better grip and cornering. FEATURES - Wind-tunnel-proven 50mm Hookless Aero Rim Profile provides a maximum aerodynamic advantage - High tensile strength carbon fiber is placed at only the most crucial points to provide optimal stiffness and class-leading weight - Hookless rim design saves weight and creates a broad 22.4mm inner rim width for increased actual tire contact patch, resulting in better traction and compliance - A thick rim bead of up to 3.8mm on each side enhances rim bead stiffness, offering increased support for better cornering - Dynamic Balanced Lacing (DBL) technology makes a stiffer, more efficient wheel as a wider hub flange increases spoke bracing angles for outstanding power transmission - Low friction hub with precision machined internals eliminates excessive bearing load, reducing bearing friction, lowering rolling resistance and minimizing power loss SPECIFICATIONS - Tubeless: Giant Tubeless System (rim tape and valve kit included) - Suggested Tire Size: 700 x 25C – 700 x 32C - Rim Height: 50mm - ETRTO: 622-22 - Hub Compatibility: Shimano HG, SRAM XDR (XDR driver sold separately) - Bearing: Sealed Cartridge - Weight (Front): 703g

Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface

Zipp's 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. Already this wheelset and its MOTO Technology are proven with multiple victories in the Enduro World Series with our pioneering partnership with Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers-uninhibited by legacy technology-took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. Zipp's Speed Line graphics give you the choice of five colors for a wheel with high-performance aesthetics. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano HB-M475 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes

Zipp's 3ZERO MOTO carbon 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips The valves you need to upgrade to Tubeless These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Use only with Bontrager TLR rim strip with rectangular base - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Sold as singles

The all-new CXR 2 gravel WheelSystem showcases Giant's prowess in building strong, lightweight carbon wheels. Through improved carbon layup, innovative hookless technology, and a large inner rim width that allows for wider tires and lower pressures, the CXR 2 is as strong as our XCR cross-country mountain bike wheel but at a much lighter weight. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high-tensile strength carbon fiber placed at the most crucial structural points to provide stiff, compliant, and lightweight wheels - A 35mm all-round rim profile with a contemporary wider inner width (25mm) offers improved support for today's higher volume road and gravel tires

The all-new CXR 2 gravel WheelSystem showcases Giant's prowess in building strong, lightweight carbon wheels. Through improved carbon layup, innovative hookless technology, and a large inner rim width that allows for wider tires and lower pressures, the CXR 2 is as strong as our XCR cross-country mountain bike wheel but at a much lighter weight. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high-tensile strength carbon fiber placed at the most crucial structural points to provide stiff, compliant, and lightweight wheels - A 35mm all-round rim profile with a contemporary wider inner width (25mm) offers improved support for today's higher volume road and gravel tires

Your riding doesn’t need to stop when the weather gets cold. Features - Giant road thru-axle trainer axle - Alloy construction - For use on 2017+ Giant road bikes with a 142x12mm rear thru-axle

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type 12mm TA - Hub Spacing 197mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 94mm - Rim inner width range 45mm+ - Rim Color Black - Rim Drilling 32 - Hub Model Novatec D202SB - Wheel Weight 1720g - Spoke Type Stainless Black - Valve Presta - Rim External Width - - Depth 20mm - Rim Model Evo JP96 - Skewers Included No

- Eclypse S9 50mm Carbon - Tubeless-ready, highly aero U-shaped rim - Black straight-pull bladed aero spokes - Japanese sealed cartridge bearings (2 front, 4 rear) - Inner Rim Width: 17mm - Outer rim width: 28mm - Rim Height: 50mm - Presta valve - 20/24 holes - Brake pads not included

Rims: WTB ST i23 24" - ETRTO 507-23 - Inner width: 23mm - Disc Brake Only - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Shimano HB-MT400-B Boost - 15x110mm (Axle not included) - Center Lock (6-Bolt adapter included) - Angular contact bearings - Contact sealed hub Assembled in North America by experienced wheelbuilders with Sapim stainless steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Position Front - Wheel Diameter/ISO 26'' / 559 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula FM-21-QR - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes

- Affordable and reliable road rim brake wheelset - Silver rim, spoke and hubs for a classic look - Semi-aero Alex DA22 rim is light (450g) and stiff - Shimano Tiagra-grade RS400 hubs feature smooth, adjustable cup-and-cone bearings with polished races for superior, long lasting performance - 32 stainless steel spokes and brass nipples for long term reliability - 8-11 speed compatible Shimano HG11 freehub body. See "Documents and links" for more details on compatibility.

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included Rear hub: Shimano FH-M475 (Black) - 10x135mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub and freehub body - Quick Release Binder included - Compatible with 8,9,10 speed (MTB 11 speed requires 1.85mm spacer, not included) - Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Affordable and reliable road rim brake wheelset - Black rim and hubs for a more modern look - Semi-aero Alex DA22 rim is light (450g) and stiff - Shimano Tiagra-grade RS400 hubs feature smooth, adjustable cup-and-cone bearings with polished races for superior, long lasting performance - 32 stainless steel spokes and brass nipples for long term reliability - 8-11 speed compatible Shimano HG11 freehub body.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Freehub bodies for Zipp Cognition hubs.

Superior hookless rim structure and a 30mm inner width makes the XCR 1 30 incredibly durable. And its best-in-class weight (1456g) makes it lightning fast. - 30mm inner width offers increased support for wider tires, improving stability under hard cornering and when tackling technical terrain. - Hookless rim technology offers consistent carbon fiber structure as rim bead reinforcement widens the tops of the rim sidewalls to 3.5mm, dispersing impact load and increasing durability. - Optimized carbon lay-up places high-tensile strength carbon fiber at only the most crucial points, creating an exceptionally solid rim structure without adding weight. - Dynamic Balanced Lacing technology makes a more efficient wheel that allows riders to accelerate faster and maintain maximum power transfer.

Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with SSR and Select wheels - Includes 11mm Allen key adapter for installation

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

Maxle Lite Lever Assembly - Fits Maxle Lite - Includes lever section only

Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.

V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts. - 7075 Machined Aluminum valve stem and cap - Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts - 4mm machined Allen Key slot for easy installation and removal - Includes Valve Core Removal Tool (integrated into spare alloy cap) - Supplied with various rubber bases to optimize fit with multiple rim types

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6'' tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asymmetrical design, builds into an incredibly durable wheel that brings added confidence to every ride. Specs: - Rim Material: Aluminum - Rim Eyelets: No - Valve: Presta - Rim Construction: Double wall - Brake Type: Disc - Tire Type: Tubeless Ready

Boostinators are hub specific conversions designed to take non-boost hubs and convert them to boost compatibility. Don't toss out that wheelset - Boostinate it.

Upgrade or refresh your bike. GENUINE REPLACEMENT PARTS When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Connection Disc wheels - Durable double-wall rim with 20mm internal, 26mm external width - Black rim graphics and spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Upgrade or refresh your Bontrager wheels. When it's time to refresh your trusty wheelset, Trek genuine replacement parts have you covered. PRODUCT DETAILS - Original equipment replacement freehub for RX-342 hubs - Can also be used to upgrade RX-142 hubs - Requires RX-342 Axle Kit when installed on RX-142 hubs

Rims: WTB CZR i30 Carbon 29" - ETRTO 622-30 - Inner width: 30mm - Torayca T700 UD carbon fiber for stiffness and compliance - Asymetric and angled spoke hole drilling - Externally reinforced spoke bed - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Shimano XT HB-M8110-B Boost - 15x110mm (Axle not incl.) - Center Lock (6-Bolt adapter incl.) - Polished angular contact bearings - Contact sealed hub Rear hubs options: Shimano XT FH-M8010-B (Boost, HG) / FH-M8110-B (Boost, MS) / FH-M8130-B (SuperBoost, MS) - Center Lock (6-Bolt adapter incl.) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible 10/11 speed MTB (12 speed HG with 1.85mm spacer, not included) - MS compatible 12 Spd Micro Spline Sold in Pair, including: - Tubeless Valve (x2) Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.

In designing an upgraded hubset for our pro-proven Firecrest wheel lineup, we turned to our engineering colleagues at SRAM's development center in Schweinfurt, Germany. The result is the ZR1 hubsets for disc wheels. This hubset features better seal design for improved durability and quicker response with 66 points of engagement. Our engineers spent more than two years developing the ZR1. Proving the durability of the hubset included more than 58,500km of test riding, part of 3,222 hours of total testing. The ZR1 features key technology from Zipp's Cognition hubs. The seal design is the same as the Cognition, with a large dust cap at the base of the driver body and better bearing seals for more protection. The bearing size also is the same as the Cognition, although the Cognition uses a premium bearing. The six pawls are offset to work in two groups of three pawls. There are always three pawls engaging. This design creates a quick engagement feel, with 66 points of engagement. The driver body is designed so pawls stay in place for disassembly to make service convenient. Zipp hubs are designed to use J-bend spokes, the most popular type of spokes today. J-Bend, widely available, are easier to replace. - Better sealing, increasing durability over previous hub model - Quick engagement for a responsive ride - Lightweight - Same bearing size as premium-level Cognition hub - e-bike certified - Disc brake hub with Center Lock rotor interface. The lock ring is included

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 187mm - 1 axle per bag

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub (1): Formula DHT148 (Black), Laser etched logo, 12mm TA, O.L.D. 148mm BOOST - Rear hub (2): Formula DC2241 (Black), Laser etched logo, M9x141mm BOOST141 - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt Disc mount - Sealed Bearings (DC711 & DHT148) - TA Axles, not incl. - Quick Release binder incl. (DC2241) - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Tubeless Valve included)

Industry Nine Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools. - From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards in Asheville, NC - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - Classic j-bend spoke interface - Steel cartridge bearings are durable - Easily serviced with no proprietary tools; Designed to keep you in the saddle and out of the service queue

Industry Nine Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools. - From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards in Asheville, NC - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - Classic j-bend spoke interface - Steel cartridge bearings are durable - Easily serviced with no proprietary tools; Designed to keep you in the saddle and out of the service queue

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included Rear hub: Shimano FH-M475 (Black) - 10x135mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub and freehub body - Quick Release Binder included - Compatible with 8,9,10 speed (MTB 11 speed requires 1.85mm spacer, not included) - Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB ST i23, inner width: 23 mm - TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes Front hub: - Shimano HB-M525, M9x100mm - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included Rear hub: - Shimano FH-M525, M10x135mm - HG Freehub compatible with 8 - 10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included - Tubeless Compatible (Valve and Tape not included)Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples

- Laced with Sapim Laser triple-butted spokes and mechanically locking alloy nipples. - M-pulse Hub - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for 2.00"-2.25" XC and Trail tires

- Extra long quick release for rear axle mount rack systems

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Shimano HB-MT200 (Black), Shimano logo, M9x100mm - Rear hub: Shimano FH-MT200-B (Black), Shimano logo, M9x141mm BOOST141 - HG Freehub compatible with 8 - 10, MTB 11-speed - Center Lock disc mount - Adjustable bearings - Quick Release binders included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-M4050 (Black), Shimano logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - Center Lock disc mount - Adjustable bearings - Rear Quick Release binder included - Front E-THRU Axle not included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano FH-MT400-B (Boost, HG) - 12x148mm (Axle not included) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

Zipp's 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheelset and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features improved seal design for better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - Lifetime Warranty

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 135mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 146mm - 1 axle per bag

- Kits include one pair of end caps - Instructions and hub axle determinations are available online @ www.notubes.com

Rear end cap conversion kits for NoTubes Neo and Neo Ultimate hubs - SealLock end caps feature a low friction U-cup seal that snaps into place

Upgrade or refresh your bike. - Bontrager AT-550 single wall, non-eyeletted rims - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading. - Weight: 313 grams